DRY Coolers H/V/W and Vertical Types

Dry Coolers are designed for use in medium and large capacity process cooling and air conditioning systems.

Dry Coolers are designed for use in medium and large capacity process cooling and air conditioning systems.

Dry Coolers are designed for medium and large capacity process cooling and air conditioning systems. The capacity range of the products is 122- 660 Kw. Standard catalog capacity calculations are based on EN 1048 and the relevant Eurovent standard. Correction factors given for the calculation of capacity values in different conditions should be used. High efficiency Heat exchanger batteries, which are produced with aluminum wing and copper pipe as standard, are designed using special computer program. The wing height of the dry coolers is 2.5 mm.

Depending on the working medium, epoxy coated aluminum wings, all epoxy coated batteries, copper wings, etc. different material options available. Optional use of grooved material is possible in the tubes. The collectors are made of steel material, with venting valve and discharge plugs on them. Optimum design of the circuit is also provided; water and water / glycol mixture at different ratios. In dry coolers, fans with high energy efficiency and low sound level are used. Fans in one row at most 1x5; in double rows with 2x5 rows. Fan motor protection IP 54, insulation class F. Electrostatic powder coated galvanized steel sheet is used in unit construction. The standard color is RAL 7032. It is possible to use different colors on request.

In dry coolers, the unit can be manufactured in the form of Vertical, Horizontal, V and W Type depending on the position. Fan speed control systems, Electric panel, EC fans, measuring devices, intervention caps, on / off switches, vibration dampers, etc. systems and equipments are other accessory alternatives.

Precaution against frost risk should be taken during winter months. To prevent frost, glycol-water mixture (salted water) must be used. All materials used have high qualities and life expectancy. If the designed products are operated in accordance with the maintenance instructions, their industrial life is long. No service is required.

They have the advantages of mass production and fast delivery with high quality workmanship. Dry coolers are designed to be easy to mount on site. Dry coolers are manufactured, tested and controlled by using machines, tools and devices with the latest technology in production within the scope of ISO 9001: 2008 quality assurance standards

Dry coolers are designed for use in medium and large-capacity process cooling and air conditioning systems.

Our product range offers capacities from 122 to 660 kW.

The standard catalogue capacities are based on the EN 1048 and related Eurovent standards. Please note that correction factors should be used when calculating capacity values under different conditions.

Our high-efficiency heat exchanger coils are manufactured with aluminium fins and copper tubes as standard. They are designed using a special computer program.

The fin pitch of Dry Coolers is 2.5 mm.

Depending on the working environment, we can supply epoxy-coated aluminium fins, fully epoxy-coated coils, copper fins, etc. as material options. We can also supply optional grooved material for the pipes. Our collectors are made of steel and have bleed valve and drain plugs.

The optimum design has been created for use with water and water/glycol mixtures at different ratios. The fans used in dry coolers are highly energy-efficient and operate at a low noise level. The fans are available in two sizes: 1x5 in single row and 2x5 in double row. The fan motor protection is IP 54, and the insulation class is F.

Dry coolers are designed for use in medium and large-capacity process cooling and air conditioning systems.

Our product range offers capacities from 122 to 660 kW.

The standard catalogue capacities are based on the EN 1048 and related Eurovent standards. Please note that correction factors should be used when calculating capacity values under different conditions.

Our high-efficiency heat exchanger coils, manufactured with aluminium fins and copper tubes as standard, are designed using a special computer program.

The fin pitch of Dry Coolers is 2.5 mm.

Depending on the working environment, we can supply epoxy-coated aluminium fins, fully epoxy-coated coils, copper fins, and so on. Alternatively, we can provide collectors made of steel with bleed valve and drain plugs.

The optimum design has been created for use with water and water/glycol mixtures at different ratios. The fans used in dry coolers are highly energy-efficient and operate at a low noise level. The fans are available in two sizes: 1x5 in single row and 2x5 in double row. The fan motors are IP 54 rated and have an insulation class of F.